How To Repair Cedar Siding

Home - Diy

How to Repair Outside Cedar Siding

The usefulness of cedar for outside applications, such every bit siding and fencing, is due to its exceptional weather condition resistance, but over time, even cedar siding can exist damaged from exposure to wet and ultraviolet (UV) rays. Moreover, insects and birds tin bore holes and wet can cause boards to warp and cleft.

If it's well maintained, cedar siding can final for fifty years or more.

Forest cleaner can be used to remove dominicus-damaged wood fibers and smaller cracks and holes can be filled with exterior forest putty, just badly damaged siding boards need to be removed and replaced with new, intact material.

• Wood cleaner
• Roller or sprayer
• Nylon scrub brush
• Wood putty
• Putty knife
• 120-dust sandpaper
• Pry bar
• Slater's ripper
• Hacksaw blade saw
• Round saw
• Corrosion resistant nails
• Hammer

Removing Sun Damaged Wood Cobweb

1. Mix a solution of wood cleaner. Wood cleaner is generally sold in a full-bodied formula. Follow the manufacturer's instructions regarding the proper dilution to employ for removing sun damaged wood cobweb.

2. Moisture the wood with a hose, and apply the forest cleaner with a roller or sprayer. Leave the wood cleaner on the wood for 15 to thirty minutes.

3. Scrub the siding vigorously with a nylon scrub castor. Scrubbing should remove the grayed and sunday damaged wood cobweb and leave the healthy underlying wood intact.

4. Rinse the siding down thoroughly with water.

Repairing Small Defects in Cedar Siding

1. Employ a putty knife to apply exterior forest putty to smaller cracks or holes in siding. Work the putty down into the holes, and smear the putty over the elevation and edges of the defect.

2. Follow the manufacturer'due south instructions regarding dry time. Smaller repairs, like nail holes, require just a couple of hours, while wider, deeper repairs can crave 24 hours to cure completely.

3. Use a piece of 120-dust sandpaper to smooth the dry putty. Piece of work the putty with the sandpaper until it lies affluent with the surface of the cedar siding.

Removing and Replacing Badly Damaged Cedar Siding

1. Use a pry bar to elevator the siding lath to betrayal the blast shafts.

2. Pull the nails with a slater'south ripper, or cutting them with a hacksaw blade saw. A slater's ripper is a specialized tool you tin slide under the siding and use to hook and pull the nails out. A hacksaw blade saw is a narrow, toothed saw bract mounted to a handle. Slide the hacksaw blade saw underneath the siding and use it to saw the exposed nail shafts. Remove the freed slice of damaged cedar siding.

3. Apply a circular saw to cut the board to length, and fasten it in place with nails. The length of nail you apply will depend on the thickness of the siding. E'er use corrosion resistant nails when working with cedar wood. Galvanized, hot-dipped zinc coated, and aluminum nails are all appropriate. Follow the existing blast patterns to create a consistent appearance.

Tip

Cedar tin darken over fourth dimension. If your cedar siding has turned night, employ forest brightener to restore the natural colour and luster of the wood.

Alert

Wood cleaner and wood brightener comprise chemicals that can harm skin and optics. Wear protective clothing, including centre habiliment and prophylactic gloves, when working with these products.

The Drip Cap

• The usefulness of cedar for exterior applications, such as siding and fencing, is due to its exceptional weather resistance, but over time, even cedar siding can exist damaged from exposure to moisture and ultraviolet (UV) rays.
  
• Wood cleaner can be used to remove lord's day-damaged wood fibers and smaller cracks and holes tin be filled with exterior wood putty, but badly damaged siding boards need to be removed and replaced with new, intact material.
  
• Mix a solution of wood cleaner.
  
• Woods cleaner is more often than not sold in a full-bodied formula.
  
• Follow the manufacturer'south instructions regarding the proper dilution to utilize for removing sun damaged woods fiber.
  
• Use a round saw to cutting the board to length, and fasten it in identify with nails.

Source: https://homesteady.com/12282025/how-to-repair-exterior-cedar-siding

Share this post